Amazon FBA · Battery shipping

UN 38.3 Test Report: What Amazon Sellers Need Before Shipping Batteries

Learn what a UN 38.3 test summary must contain, how to match it to your battery model, and what Amazon FBA sellers should check before booking freight.

By ForwarderOneNovember 17, 20268 min read
Quick answer Ask your supplier for the UN 38.3 test summary and match its model and specifications to the battery in your shipment. The manufacturer keeps the full test record. Confirm packaging, carrier acceptance and Amazon FBA requirements before booking.

What a UN 38.3 test report is, and how it differs from the test summary

UN 38.3 is the section of the United Nations Manual of Tests and Criteria that sets out how lithium cells and batteries are tested for transport. A lab runs a series of tests on sample cells and batteries, then issues a test report to the manufacturer. That report is detailed, technical and usually belongs to the manufacturer or the lab.

The test summary identifies the tested design, the lab and report, and the result of each test. Suppliers often call either document “the UN 38.3 report.” Ask which document they are sending.

  • The full report proves the testing happened. Under U.S. rules, the manufacturer must create a record of satisfactory completion of the testing, such as a test report, before offering the battery for transport. The manufacturer must keep it for as long as the design is offered for transport plus one year, and give it to an authorized government representative on request.
  • The summary is what you, as a distributor or importer, need in hand. Each manufacturer and each later distributor of lithium cells or batteries made on or after January 1, 2008 must make the test summary available, with an exception for button cells installed in equipment.

The practical consequence is simple. Ask your supplier for the summary first. If a carrier, customs broker or marketplace asks for more, the manufacturer is the one who holds the full report.

Which products need it

The rule is broad. Under 49 CFR 173.185(a)(1), each lithium cell or battery must be of a type proven to meet the UN Manual’s sub-section 38.3, whether or not the cells inside a battery were tested individually.

For an Amazon seller, that covers more products than you might first think:

  • Power banks, e-bikes, scooters, and rechargeable tools with battery packs
  • Wireless earbuds, speakers, smartwatches and similar electronics with built-in lithium cells
  • Toys, LED lights, cameras and trackers with lithium coin or pouch cells
  • Batteries sold as accessories or spare packs

For a private-label product with a built-in battery, ask for the summary during sample approval. Record the product model and the battery model together so you can trace the production unit back to the tested design.

The eight tests, and which ones your battery takes

The UN Manual defines eight tests, T1 through T8. The applicable tests depend on the design, including whether the item is a cell, a rechargeable pack, or a component cell shipped inside an assembly. The test lab can explain which tests apply. See UN Manual of Tests and Criteria, subsection 38.3.

Test What it checks Applies to
T1 Altitude simulation Low pressure, as in an aircraft cargo hold Cells and batteries
T2 Thermal test Rapid swings between extreme hot and cold Cells and batteries
T3 Vibration Shaking similar to transport Cells and batteries
T4 Shock Sudden jolts Cells and batteries
T5 External short circuit A short across the terminals Cells and batteries
T6 Impact or crush Physical damage Cells (and component cells)
T7 Overcharge Charging beyond the design limit Rechargeable batteries only
T8 Forced discharge Driving a cell below its limit Cells only

Check that the lab summary lists the applicable tests and their results.

The eight tests, and which ones your battery takes

What the test summary must contain

For U.S. transport, check the summary against the ten elements in 49 CFR 173.185(a)(3).

  1. Name of the cell, battery or product manufacturer, as applicable
  2. Manufacturer’s contact details: address, phone number, email and website
  3. Test lab name, address, telephone number, email and website
  4. A unique test report identification number
  5. Date of the test report
  6. A description of the cell or battery: lithium ion or lithium metal, mass, watt-hour rating or lithium content, a physical description, and the cell or battery model. A summary for equipment containing the battery can use the product model
  7. A list of the tests conducted with pass or fail results
  8. A reference to assembled battery testing, where that applies
  9. The revision and amendments of the UN Manual of Tests and Criteria used
  10. Name and title of the person responsible for the information

If a supplier sends a brief compliance statement, ask for the summary that identifies the specific model and includes all required fields.

How to check your supplier’s documents, step by step

Here is a routine you can run before you place a production order or book freight.

1. Ask for the summary by name

Request the “UN 38.3 test summary” and the battery’s safety data sheet. Also ask for the model number of the cell or battery pack exactly as it will appear in your product. Do not accept a photo of a certificate or a one-line statement as a substitute.

A shipper may use information from the manufacturer as evidence that the battery is a tested type. Manufacturers and subsequent distributors have a separate duty to make the test summary available where required. See PHMSA interpretation 22-0007.

2. Match the summary to your exact battery

Open the summary and compare it against your product:

  • Model number: does it match the battery inside your unit, not a similar one from the same factory?
  • Watt-hour rating: it should match the label. Watt-hours are volts multiplied by amp-hours. A 3.7 V pack rated at 5.0 Ah is 18.5 Wh. If the summary shows a different figure, the document may cover another pack.
  • Mass and chemistry: lithium ion versus lithium metal, and the stated weight.
  • Tests listed: check that the lab lists the applicable tests and results for the design.

3. Check all ten elements are present

Check the lab’s contact details, the report number and the responsible person’s name and title. Ask for a corrected copy if an applicable field is missing.

4. Check the date and the Manual revision

Check which revision and amendments the lab used and ask whether the report still covers the current design.

5. Lock the design

PHMSA’s Lithium Battery Guide states that any change or modification that would lead to a test failure must be considered a new type and retested. Swapping cell suppliers, changing the pack capacity or altering the protection circuit to cut costs can all fall into that category. Put it in your purchase order: no changes to the battery without written notice.

6. Keep the files with your shipment records

Save the summary, the SDS and the supplier’s contact details with your commercial invoice and packing list. When freight is booked, send them with the booking so nobody has to chase them while your cargo sits.

Who is responsible when something is missing

The short answer is that the shipper is responsible. PHMSA’s guide says shippers must ensure that lithium cells and batteries offered for transportation have passed the UN 38.3 design tests. It recommends checking with the battery manufacturer or distributor to see whether the design passed, or obtaining the test summary if possible.

Agree who will offer the goods to the carrier and who will keep the documents available. Confirm the importer and exporter roles and complete the FBA dangerous goods checks before booking.

Other U.S. battery rules that sit next to UN 38.3

The test summary is one piece. Under 49 CFR 173.185, as of May 10, 2024, each lithium ion battery must be marked with its watt-hour rating on the outside case. Cells and batteries (outside certain exceptions) must also incorporate a safety venting device or be designed to preclude violent rupture, be equipped to prevent external short circuits, and prevent dangerous reverse current flow in parallel-connected cells. PHMSA’s guide adds that packages must prevent short circuits, shifting damage and accidental activation.

Five lithium battery shipping safety checks

Amazon asks sellers to complete battery compliance questions when listing or relisting eligible FBA products. Check the ASIN’s document requests in Seller Central. Amazon’s published air-shipping rule covers lithium-ion batteries above 2.7 Wh packed with products and sets a 30% state-of-charge limit. Confirm the packing configuration and applicable carrier rules before tender. See Amazon’s seller announcement and IATA battery guidance.

For air shipments, the paperwork continues. See our checklists on the SDS and UN 38.3 documents, dangerous goods documentation and filling in the IATA dangerous goods declaration.

A worked example

Consider a rechargeable handheld fan with a 3.7 V, 4.0 Ah battery pack from a supplier in Shenzhen.

  1. You ask for the test summary. The supplier sends a one-page “UN 38.3 certificate” with no list of tests and no lab contact details. That is not a complete summary, so you ask for the full ten-element document.
  2. The second document arrives. The model number ends in “-B” while your pack is marked “-A”. You ask whether they are the same design and whether “-A” was tested.
  3. The supplier sends a new summary for model “-A”. It lists T1 to T5 and T7 as passed, shows 14.8 Wh (3.7 V × 4.0 Ah), and identifies the report, lab and responsible person.
  4. You attach the summary and SDS to your booking, confirm the watt-hour mark is printed on the battery case, and check the packing, labeling and carrier acceptance for the planned route.

Check the summary before production ends so the supplier can resolve a model mismatch before the cargo is packed.

FAQ

Is a UN 38.3 test report the same as a test summary?

The manufacturer retains the detailed testing record. The test summary identifies the design and summarizes the test results in the required fields. Ask your supplier for the summary by name.

Does my product need UN 38.3 if the battery is built in?

U.S. rules generally require a tested battery design, including batteries built into equipment. The U.S. test-summary requirement has an exception for button cells installed in equipment. Confirm marketplace and carrier document requests separately.

Is a supplier’s email or SDS statement enough?

An email or safety data sheet may provide evidence from the manufacturer that the design was tested. Where the test summary is required, request the document with all ten elements.

What happens if I change the battery after testing?

A change or modification that could cause a test failure makes the battery a new type that must be retested. Changing cell suppliers, pack capacity or protection circuits are typical examples, so agree with your supplier that they will tell you before any change.

Can I ship batteries with a summary that covers a similar model?

Only if the summary covers your exact battery. Check the model number, watt-hour rating, mass and chemistry against the unit you are shipping. If they differ, request a summary for your actual model.

Plan battery freight from China

Send ForwarderOne the test summary, battery model, packing configuration and destination so we can review routing and carrier acceptance before you book.

Explore Amazon FBA shippingSee China to USA DDP shipping